aluminium sheets for raised beds

minnie pal · **Posted: 04-10-2009 , 09:43 PM** #1

hi, i want to make a corner curved raised bed, aluminium sheeting was suggested, anyone know where i might get some sheets of this at not too expe=nsive price?
thanks in anticipation.
minnie pal

cianer · **Posted: 04-10-2009 , 11:11 PM** #2

I have aluminium sheeting I recently took from an old mobile home I dismantled in the garden. There's paint on one side which could easily be removed with a sander. There's loads of it so i'm sure there's a piece to suit you. Will be bringing it to the recycling centre in the next few weeks anyway

minnie pal · **Posted: 14-10-2009 , 10:23 PM** #3

sorry for not getting back to you sooner.
have you any of the aluminium sheeting left?
I really would love it! and can collect.
where are you? that is if it has not departed for further pastures green or otherwise?
minnie pal

cianer · **Posted: 14-10-2009 , 11:07 PM** #4

We still have it, haven't gotten organised enough yet to get it to the recycling centre! We're in north Dublin, near Skerries

minnie pal · **Posted: 14-10-2009 , 11:27 PM** #5

Now dont go and get too organised yet! I would love to come to skerries shortly to seek out your aluminium, but skerries might be a tad bit far for me to drive so i have used up my pa hours this week and next so bare with me and when i get a driver i would wing (drive out) and see your aluminium with hope.
would that be ok with you?
xminnie pal

cianer · **Posted: 14-10-2009 , 11:47 PM** #6

that's no problem, I have to borrow the work van anyway so it's no hassle to hang on, no panic! Give me a shout when you're ready

dee1 · **Posted: 16-10-2009 , 07:33 PM** #7

Quote:

Originally Posted by minnie pal

hi, i want to make a corner curved raised bed, aluminium sheeting was suggested, anyone know where i might get some sheets of this at not too expe=nsive price?
thanks in anticipation.
minnie pal

where are you based?do you mean the galvinise sheets.

minnie pal · **Posted: 18-10-2009 , 03:06 PM** #8

I am in the dun laoghaire area, just out of the flipping hospital now! can collect or come and see the aluminium sheeting if still available soon.
xminnie pal

dee1 · **Posted: 18-10-2009 , 03:29 PM** #9

Quote:

Originally Posted by minnie pal

I am in the dun laoghaire area, just out of the flipping hospital now! can collect or come and see the aluminium sheeting if still available soon.
xminnie pal

i hope all is well health wise w/you now,what i'd have left 3/4 sheets isnt worth driving for,would be cheaper to buy it ,sorry.
But if anyones in my neck of the woods their welcome to them...

cianer · **Posted: 19-10-2009 , 09:08 AM** #10

@minniepal: Sheets still here waiting for ya. Send me a PM and we can sort out a time for you to come get them. Not sure how much you need but you can take as much or as little as you like.

cianer · **Posted: 19-10-2009 , 09:08 PM** #11

Hey Minniepal, I tried to send you a private message about the aluminium sheets but it says your storage is exceeded so the message wasn't delivered.

cianer · **Posted: 12-01-2010 , 03:05 PM** #12

Hey Minniepal, its been nearly 3 months since I heard from you so I've recycled all the aluminium.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

JumbleTown - Useful Links
Carlow County Council	Leitrim County Council	Sligo Borough Council
Cavan County Council	Limerick City Council	Sligo County Council
Clare County Council	Limerick County Council	South Dublin County Council
Cork City Council	Longford County Council	South Tipp County Council
Cork County Council	Louth County Council	Waterford City Council
Donegal County Council	Kildare County Council	Waterford County Council
Dublin City Council	Kilkenny County Council	Westmeath County Council
Dun Laoghaire/Rathdown	Mayo County Council	Wexford County Council
Fingal County Council	Meath County Council	Wexford Borough Council
Galway City Council	Monaghan County Council	Wicklow County Council
Galway County Council	North Tipp County Council	Race Against Waste
Kerry County Council	Offaly County Council	Dept. of the Environment
Laois County Council	Roscommon County Council	Limerick Clare Kerry Waste Management
Northern Ireland Local Authorities
JumbleTown Press Centre

	Posted: 04-10-2009 , 09:43 PM #1
minnie pal Member Join Date: Mar 2009 Location: dun laoghaire Posts: 433	aluminium sheets for raised beds hi, i want to make a corner curved raised bed, aluminium sheeting was suggested, anyone know where i might get some sheets of this at not too expe=nsive price? thanks in anticipation. minnie pal

	Posted: 04-10-2009 , 11:11 PM #2
cianer Member Join Date: Apr 2007 Location: Skerries, Co. Dublin Posts: 150	I have aluminium sheeting I recently took from an old mobile home I dismantled in the garden. There's paint on one side which could easily be removed with a sander. There's loads of it so i'm sure there's a piece to suit you. Will be bringing it to the recycling centre in the next few weeks anyway

	Posted: 14-10-2009 , 10:23 PM #3
minnie pal Member Join Date: Mar 2009 Location: dun laoghaire Posts: 433	hi sorry sorry for not getting back to you sooner. have you any of the aluminium sheeting left? I really would love it! and can collect. where are you? that is if it has not departed for further pastures green or otherwise? minnie pal

	Posted: 14-10-2009 , 11:07 PM #4
cianer Member Join Date: Apr 2007 Location: Skerries, Co. Dublin Posts: 150	We still have it, haven't gotten organised enough yet to get it to the recycling centre! We're in north Dublin, near Skerries

	Posted: 14-10-2009 , 11:27 PM #5
minnie pal Member Join Date: Mar 2009 Location: dun laoghaire Posts: 433	so glad Now dont go and get too organised yet! I would love to come to skerries shortly to seek out your aluminium, but skerries might be a tad bit far for me to drive so i have used up my pa hours this week and next so bare with me and when i get a driver i would wing (drive out) and see your aluminium with hope. would that be ok with you? xminnie pal

	Posted: 14-10-2009 , 11:47 PM #6
cianer Member Join Date: Apr 2007 Location: Skerries, Co. Dublin Posts: 150	that's no problem, I have to borrow the work van anyway so it's no hassle to hang on, no panic! Give me a shout when you're ready

	Posted: 18-10-2009 , 03:06 PM #8
minnie pal Member Join Date: Mar 2009 Location: dun laoghaire Posts: 433	hi sorry I am in the dun laoghaire area, just out of the flipping hospital now! can collect or come and see the aluminium sheeting if still available soon. xminnie pal

	Posted: 19-10-2009 , 09:08 AM #10
cianer Member Join Date: Apr 2007 Location: Skerries, Co. Dublin Posts: 150	@minniepal: Sheets still here waiting for ya. Send me a PM and we can sort out a time for you to come get them. Not sure how much you need but you can take as much or as little as you like.

	Posted: 19-10-2009 , 09:08 PM #11
cianer Member Join Date: Apr 2007 Location: Skerries, Co. Dublin Posts: 150	Hey Minniepal, I tried to send you a private message about the aluminium sheets but it says your storage is exceeded so the message wasn't delivered.

	Posted: 12-01-2010 , 03:05 PM #12
cianer Member Join Date: Apr 2007 Location: Skerries, Co. Dublin Posts: 150	Hey Minniepal, its been nearly 3 months since I heard from you so I've recycled all the aluminium.