![]() |
![]() |
Posted: 31-05-2011 , 01:47 PM #1 |
Member
Join Date: Sep 2008
Location: Ballaghaderreen, Co. Roscommon
Posts: 52
|
![]() Hi,
The wonderful weather last Winter got behind the exterior paint on my cottage, which means that I now have the job of removing it all before re-painting. Any suggestions for the best way to remove the paint? Some of it is scraping off nicely, but obviously there are parts that are so well stuck I can't get rid of them. The top coat (done last Summer) is Weathershield, not sure what's under it. All suggestions will be tried! Thanks, Tod. |
![]() |
![]() |
JumbleTown Sponsored Links |
|
![]() |
Posted: 01-06-2011 , 12:51 AM #2 |
Member
Join Date: Jun 2006
Location: Co. Kilkenny
Posts: 254
|
![]() local painter here, powers-hoses, then see him with painter scraper and wire brush. Hope this is of Help. I also power hose wall beside house to remove paint that's peeling and brush over with wire brush too.. Works for me..........
|
![]() |
![]() |
![]() |
Posted: 01-06-2011 , 12:56 AM #3 |
Member
Join Date: Jul 2007
Location: Co. Limerick
Posts: 1,037
|
![]() Our cottage was so bad that we have been using the power-hose and a electric sander, hard work but it pays to do it right in the long term.
Not very green though as it uses water and electricity. |
![]() |
![]() |
![]() |
Posted: 01-06-2011 , 07:48 AM #4 | |
Member
Join Date: Jul 2009
Location: Mallow, Co. Cork
Posts: 861
|
![]() Hi Tod
Not sure you should worry about those parts; your power washer and scrapers should do the job for the part which is peeling off; if you can use some form of primer (at least 1 coat) and then paint again with the weathershield (2 coats would be best, you don't use as much with the 2nd coat anyway), I'd say it should be fine... Dannloads Quote:
|
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|